“I have had the pleasure of working with Mike for four years as our National Sales Manager. He has done a fabulous job of growing our sales efforts, even during the recent economic downturn,” said Pamela Kan, president of Bishop-Wisecarver. “The Board of Directors felt that bringing Mikes’ management skills to our entire sales channel will be an important element of our global sales efforts going forward. I look forward to working with Mike on our strategic sales plans for growing our sales both domestically and internationally.”

McVeigh is a college graduate from the University of New York at Buffalo. Prior to joining Bishop-Wisecarver in 2006 as the National Sales Manager, McVeigh worked in the bearing industry for 16 years in both sales and marketing. Since his hire at Bishop-Wisecarver, he has grown to appreciate the uniqueness of Bishop-Wisecarver’s customer base and their applications.

“Our overriding company goal is to become the customer’s 1st choice,” said McVeigh. “I am honored to be leading our team to meet this challenge as the Vice President of Sales.”

Bishop-Wisecarver
www.bwc.com

The URS50BPP and the URS50BCC provide very low wobble and backlash-free, continuous rotation with extremely high MTBF of up to 20,000. Competitively priced, the high-performing rotation stages feature large stage performance in a very small package. The two stages also offer exceptional 6µm eccentricity and easy integration.

The URS50B’s feature a one of a kind, two-part bearing design with pre-tempered bearings and steel gears to ensure long-life motion positioning and precision. The URS50BCC, the DC-motor version with embedded index pulse for precision homing, is best suited for demanding applications that need bi-directional positioning.

The economical URSBPP stepper motor version is ideal for less demanding, yet precision rotation applications. Each URS50B has a cable URS50B for plug-and-play compatibility with XPS, SMC and ESP.

The ASRT is offered with either high accuracy encoder or magnetic encoder feedback. Unlimited travel is standard, with an optional limited travel model also available. Three different models cover a wide range of load and torque requirements.

The ASRT series uses Aerotech’s brushless, slotless motor that has no brushes to wear, no gear trains to maintain, and high acceleration and high speeds. The low inertia and zero backlash make the ASRT the ideal solution for applications requiring frequent directional changes. In addition, Aerotech manufactures a wide range of servo amplifiers and advanced controllers to provide a complete, integrated package.

Dual large-diameter bearings are used to maximize performance with respect to tilt error motion (3 arc sec), moment stiffness, and repeatability (1 arc sec). The large diameter bearings permit large payloads (up to 175 kg) without compromising performance.

Maximum rotary speeds are from 100 to 200 rpm. The ASRT includes an electrically grounded shaft and housing to protect against electrical shock and eliminate RF re-radiation, and housing grounding points are included. Circular sealed connectors are standard, while options include desiccant cartridge, air purge, and mounting flange accessory.

A polymer-based paint on the housing and a hard-coated tabletop prevent corrosion. The stage has optional brown, green, grey, black, and white paint colors. Standard operating temperature is 0 to 70°C. Operation below freezing requires the optional air-purge and desiccant, with air-purged stages operational from -20 to 70°C.

Aerotech
www.aerotech.com

The lightweight design feature low 32 mm profile height and incorporates anodized aluminum body with pre-loaded ball bearings with run-outs of 5 microns. This proprietary bearing design provides smooth rotation with minimal wobble.

A precision ground worm gear produces consistent driving torque to the rotor and eliminates variations in the motor current.

RTHM-100 stages feature an angular resolution 0.1 arc-sec, which may be achieved with either DC Servo or stepper motor controls.

The stages are equipped with a reference home sensor. RTHM-100 stages can run in continuous or start/stop rotation modes and mounted horizontally or vertically.

These stages feature zero backlash, large 50 mm center aperture and can rotate loads of 20 kg over unlimited rotation angle.

IntelLiDrives, Inc.
www.intellidrives.com

The M-660 PILine® rotation stage allows high positioning speeds to 720 degrees /sec. It also features a very low profile of 15 mm (0.6") and a 35 mm Ø clear aperture

The M-660 stage reaches top speeds of 720 degrees/sec. and resolution to 40 µrad (8 arcsec). Its self-locking ceramic drive holds the position steady at rest, with no energy consumption and heat generation. A directly coupled precision optical encoder provides phase lag-free, backlash-free feedback to the servo controller.

Features & Advantages

* Max. Velocity 720 °/s, Unlimited Travel Range
* Low Profile: Only 15 mm (0.6”)
* Self-Locking Ceramic Direct Drive: Energy Saving & High Position Stability
* Direct Metrology Linear Encoder, 40 µrad Resolution (8 arcsecs)
* PILine® Drive: Non-Magnetic, Vacuum-Compatible Working Principle
* Compact Combinations with Linear Stages Available

The compact design with minimized mass and inertia provides high precision bidirectional speed and position control, as well as high speed motion contouring. The M-660 is based on the new U-164 Piezo Motor and outperforms the stability, acceleration and settling speed of traditional servo motor direct drives and gear-driven mechanisms. The innovative motor drive was also chosen by Leica Geosystems AG’s in their newest generation of surveying instruments for geodesy, because it can provide significantly higher speeds, shorter positioning times and a very high positioning accuracy when moving the measuring optics.

A newly designed piezo motor controller is available to take advantage of the specific motion characteristics of ultrasonic ceramic motors. USB interfacing and a solid software and driver package for seamless integration are included.

PI (Physik Instrumente) L.P.
www.physikinstrumente.com

The assembly utilizes the compact Steinmeyer type MT130 linear stage together with a type DT110 rotary stage to yield two to four axes of motion – XY, X-rotary, XYZ, XY-rotary, or XYZ-rotary. Each of the MT130 stages offers 50 mm stroke with standard flatness/straightness/repeatibility of +/- 1 micron. Maximum speed is 50 mm/sec. The linear stage is driven by a miniature Steinmeyer precision ball screw and includes crossed roller bearings, limit switches, dc servomotor and rotary encoder.

The DT110 rotary stage has a +/- 1 micron flatness of rotation and repeatability of +/- 0.002 degrees. Maximum speed is 200 degrees per second. Precision brackets are used, where necessary, to easily connect the various stages to achieve the final multi-axis configuration. A compact 2 to 4-axis DC-Controller is available with “plug- and play” characteristics, including LabVIEW® compatibility. Standard options include joystick control and direct reading scales for higher accuracy.

Steinmeyer
www.steinmeyer.com

The Rotary Table RF can handle loads up to 170lbs., has a footprint of 410 x 275mm and a height of 122mm (stepper option) and 200mm (servomotor option), and can be mounted horizontally or vertically. This low backlash, rotary table is compact and sturdy, set in a rigid cast aluminum body.

Each Rotary Table RF is complete with a hardened, ground and flat-milled steel rotary surface. Maximum output torque is 188Nm and is available in 24:1, 52:1, and 100:1 ratios. Users can choose between high-speed or high-torque options, based upon their application requirements. Techno’s Rotary Table RF is ideal for use in pick-and-place, assembly, testing, inspection and dispensing applications.

View CAD Drawings, catalog specifications and more information on the New Rotary Table RF online at: http://www.techno-isel.com/Tic/Catdas/rotaryRF.htm, or call 1-800-819-3366 to speak with an application engineer or email: lminfo@techno-isel.com.

www.technoautomation.com

This complete motion subsystem offers an X-Y table function and a second linear-rotary motion on a common base axis with a common digital servo control system. In this unique architecture all axes can be controlled in simultaneous motion or independently, what ever the application requires. Typically it shuttles from rotary-linear mode to an X-Y mode at the users command to perform required operations. It can thus position workpieces and/or tooling in any combination to suit the application. Additional axes within a Cartesian coordinate system can be added for supplemental capabilities.

The mechanical translators are designed with direct drive servo motors, non-contacting encoders and most modern guide technology. The precision level is matched to the application and includes accuracies to less than 1000 nanometer with LIBEC*

–travel ranges from 125-2000mm
–digital servo control system with G-Code, standard GUI and customization
–discrete motion increments to 250 nanometers
–system customization to meet application requirements
–Al Aly or granite structures

Typical applications include laser machines, optical metrology, super precise femto laser work, semiconductor manufacturing, PV solar work, automated manufacturing operations.

NUTEC COMPONENTS
www.nutecomp.com

The Rotary Table RF can take loads up to 170 lbs. It has a footprint of 410 x 275 mm and a height of 122 mm (stepper option) and 200 mm (servomotor option). Additionally, it can be mounted horizontally or vertically. This low backlash, rotary table is compact and sturdy, set in a rigid cast aluminum body.

Each Rotary Table RF is complete with a hardened, ground and flat milled steel rotary surface. Maximum output torque is 188 Nm and is available in 24:1, 52:1, and 100:1 ratios. Customers can choose between high-speed or high-torque options, based upon their application requirements. Techno’s Rotary Table RF is recommended for use in pick and place, assembly, testing, inspection and dispensing applications.

View CAD Drawings, catalog specifications and more information on the New Rotary Table RF online at: http://www.techno-isel.com/Tic/Catdas/rotaryRF.htm

Techno, Inc. Linear Motion Systems
www.techno-isel.com