IP69K Linear Position Transducer for Harsh Applications from Balluff

Florence, KY – Balluff’s new Micropulse® ProCompact linear position transducer for demanding linear feedback applications is rugged, accurate, and protected against environmental hazards such as high humidity, ambient temperature variations, high-pressure wash down, and exposure to caustic chemicals.

The Micropulse ProCompact rod-style transducer incorporates field-proven, non-contact magnetostrictive technology into a welded, hermetically sealed stainless steel housing providing superior long-term reliability and service life compared to competing contact-based sensors such as linear or rotary potentiometers.

The ProCompact is ideal for the following types of applications: hydropower and other wet applications, railroad maintenance equipment, steel production, sawmill applications, or any other application involving high humidity, ambient temperature variations, and high-pressure wash down.

The Micropulse ProCompact linear position transducer comes in standard ¾-in.-16 UNF (optional M18 x 1.5) mounting threads, allowing the transducer to be installed into hydraulic or pneumatic cylinders. Right out of the box, the ProCompact is environmentally protected to IP68. For even more demanding applications, the threaded fitting on the ProCompact housing can accommodate a cable protection system, offering environmental protection up to IP69K.
For more information, visit www.balluff.com/procompact

PNP Output-Type Sensors for Linear Actuators

Franklin, IN – NSK Precision America now offers two types of photo sensor kits for use with its MCM and MCH Monocarrier linear actuators. The variety of sensor types available for NSK’s Monocarrier lines now includes PNP output sensors, as well as NPN output sensors. Both types of sensors are RoHS compliant and give users added flexibility to use a variety of controller types.

NSK’s Monocarrier linear actuators integrate multiple products including ball screws, linear guides and support bearings. Products in the Monocarrier line offer an all-in-one structure, maintenance-free operation and a lightweight, compact design and can be used in a wide range of applications, including assembly, inspection and transporting equipment.

For more information on NSK Precision America’s products and services, visit www.nskprecision.com.

V-Twin Magnetic Field Sensor from Balluff

Florence, KY – Balluff’s new BMF V-Twin magnetic field sensor is two sensors with one connector. This low-profile design allows users to reduce installation time and cost by requiring only one four-conductor cable with either M8 or M12 connections for two end-of-stroke sensors. Because the BMF V-Twin has just one connection for two sensors, it is ideal for detecting multiple positions on pneumatic grippers and cylinders and doubling the number of sensors in a multiple interface box.

The new BMF V-Twin is available in several sizes and form factors to cover applications from grippers and short stroke cylinders to C-Slot, T-Slot round and tie rod cylinders, in some cases without requiring additional mounting brackets. Weld field immune versions are also available.

V-Twin magnetic field sensors use magneto-resistive technology to detect the piston magnet through the aluminum wall of the cylinder. Advantages of Balluff magnetic field sensors include universal compatibility with either Hall-effect or reed switch cylinder magnet polarizations, reduction or elimination of double switch points, higher noise immunity, and elimination of electrical contact wear and sticking. Balluff magnetic field sensors come with short circuit, overload, reverse polarity protection and a lifetime warranty.

For more information, visit www.balluff.com/bmf.