Self-Closing Slide Options Expanded by Accuride

Accuride announces the addition of model 3832SC, another self-closing slide option designed with a lighter pull-force for use in less demanding applications such as medical or supply carts and industrial workstations.

The self-closing action is achieved through a spring-loaded device that activates about 1-1/2 inches from the closed position. This integrated device is designed to close drawers completely and keep them closed, eliminating the hazard of half-open drawers, while also keeping drawer fronts neatly aligned.

Model 3832SC offers a 100-lb. load rating, full extension and comes in even lengths of 12 to 28 inches. This product is RoHS compliant.

Accuride International
www.accuride.com

Accuride Expands Heavy-Duty Slide Options

Accuride presents models 7950 and 7957, two new slides designed to expand the company’s heavyduty slide line-up and provide an intermediate load rating choice between the 3600 and 9300 products. The 7900 slides offer full extension, a load rating up to 350 pounds, and accommodate drawers up to 42″ wide. For added versatility, the slides may be flat mounted at a lower load capacity of up to 150 lbs. per pair.

Designed for applications such as mobile toolboxes and utility vehicle storage, the 7900 slides are a good drop-in alternative for .75″ side space projects, giving fabricators additional slide options for midrange loads, while increasing the aesthetics of the finished product.

Model 7950 does not offer a disconnect method, while Model 7957 has a handed lever disconnect. Both models have an enhanced ball retainer design, which mitigates retainer migration. Two special order models in a smaller cross section of .724″ are also available: models 7930 (non-disconnect) and 7937 (handed lever disconnect). All products are available in lengths of 12″ to 36″ in a clear zinc finish.

Accuride International
www.accuride.com

Linear Motion Slide Solution from Accuride

Accuride announces the launch of Model 115, a linear motion ball bearing slide that provides captive travel within the length of the outer member.

Model 115 may be side, flat, or vertically mounted. When mounted vertically, it may be used as a guide in non load-bearing applications. This product provides a low-cost solution for component guidance, support, or adjustment in a wide range of applications such as access to laptop docking stations in utility vehicles; bins for postal vehicles; reading machines for the visually impaired; traffic barriers; diagnostic equipment; and material handling in manufacturing machinery.

When mounted flat in pairs, Model 115 offers up to a 132-pound load rating; side mounted installations are up to 110 pounds per pair. A guide belt synchronizes the moving elements of the slide, ensuring smooth and consistent travel, while the moving member is fully supported on ball bearings at all times.

This product has been tested to 10,000 cycles and is available in zinc in lengths of 12″ to 28″ in 2″ increments, plus 32″, 36″, and 40″. It is RoHS compliant.

Accuride International
www.accuride.com