Linear Motion Tips » iglide

igus DryLin spindle-lift tables offer lower costs for linear guide systems

admin — Thu, 05 May 2011 13:18:28 +0000

igus (www.igus.com) has announced the latest addition to its portfolio of spindle-lift tables in DryLin linear guide systems, the DryLin SLW and DryLin HTSP.

A compact, flat linear table that features a spindle drive, DryLin SLW can provide utmost torsional strength at a height of more than one and one-eighth inches. This low-clearance design is suitable for tight space restrictions and opens the door to a vast array of applications. It is the first spindle-lift table offered with the new DryLin W linear guide system, which is a low-cost, compact, modular and easy to install solution.

DryLin HTSP is a plastic spindle lift table from the range of DryLin R linear bearings that is equipped with plastic slides and crossbars, making it the company’s first plastic spindle-lift table offered at a low cost. It is corrosion-free, lightweight and lubrication-free. Its stroke can be adjusted either through a servo motor or manually. Weight can be reduced by an aluminum spindle and carbon shaft with the table. To achieve lower cost, Igus used high-performance polymers in building the spindle table.

Both products are suitable for use in textile and packaging industries. The company’s linear guide systems are a good replacement for re-circulating ball bearings mainly due to their oil-free, maintenance free and self-lubricating operation. Thus, contaminants will not thrive in DryLin. This effectively prevents shaft damage and performance degradation. Aside from offering a low coefficient of friction, DryLin bearing and guide systems are also wear-resistant and corrosion-resistant.

DryLin HTSP and SLW spindle-lift tables are also available in various sizes.

A member of the iglide suite of plastic bearings, the DryLin family also features DryLin T linear slides, DryLin R linear plain bearings, Quadroslide preassembled slide units, DryLin N micro slides and DryLin S anodized aluminum shafting.

Linear Motion Tips

Amish Communities Adopt Plastic Bearings

admin — Thu, 25 Feb 2010 17:42:31 +0000

EAST PROVIDENCE, R.I. – An Ohio-based manufacturer of horse-drawn farming equipment predominately employed by Amish communities uses iglide® plastic plain bearings from igus® on a ‘crumbler’ mechanism; used to crush clods of dirt during the tilling process. The bearings replaced a system of metal shafts and collars that required messy lubricants and frequent maintenance.

iglide G300 bearings are used on each of the crumbler’s eight rolling elements. Grease fittings made the rollers susceptible to dirt build-up, which eventually led to the formation of a thick sludge as the tool sat idle in-between harvests. Fortunately, iglide bearings are lubrication-free and dirt- and dust-resistant and so are ideal for use in this outdoor application. They are also unaffected by rain and any moisture from the soil, thanks to their corrosion-resistant and low moisture absorption properties.

iglide plastic plain bearings are available in 28 different polymers. Every iglide bearing material possesses a number of special features, which makes it suitable for particular applications and requirements. iglide G300 bearings are cost-effective and can be paired with a number of different shafting materials. They are best for rotational and oscillating movements and low to average running speeds. They also possess a low coefficient of friction and high wear-resistance. To request free samples, call 1-888-803-1895, visit www.igus.com/iglide.asp or e-mail sales@igus.com.

igus
www.igus.com

Linear Motion Tips

A wide-array of iglide plastic bearings for multiple applications

Miles Budimir — Thu, 26 Feb 2009 18:10:24 +0000

EAST PROVIDENCE, R.I. – For 40 years igus® Inc. has been developing plastic bearing materials based on engineered polymer technology and offers an extensive line of plain bearings that are both maintenance- and lubrication-free.

Iglide® plastic bearings are available in sleeve, flange and thrust-washer configurations. With 6,000 sizes and styles from stock, iglide is a cost-effective alternative to metal or ball bearings. Plastic plain bearings also do not corrode and command better vibration dampening characteristics than metal bushings. Igus customers benefit from the fact that all iglide bearings are:

long-lasting;

wear-resistant;

chemical-resistant; and

UV-resistant.

Iglide bearings are available in 20 high-performance material blends, enabling them to meet the specifications of any design. Iglide can be used in a variety of industries from farming to medical to automotive. Iglide J, which possesses low friction and extreme versatility, can be found in pick-and-place robots, pneumatics and bicycles, to name a few. Iglide H370, designed for wet and high-temperature environments, is often used in the marine industry and in applications requiring frequent wash-downs, while iglide Z510 for extreme loads is often employed in construction vehicles and tractors.

www.igus.com

Linear Motion Tips

Plastic bearings designed for wet environments and high-temperature applications

Miles Budimir — Thu, 26 Feb 2009 17:57:23 +0000

EAST PROVIDENCE, R.I. – Iglide® H370 plastic plain bearings from igus® Inc. are specially designed for wet environments and high-temperature applications. Iglide H370 is unaffected by elements such as moisture, dirt and dust and, like igus’ entire family of iglide bearings, is maintenance-free, corrosion-resistant, UV-resistant and requires no lubrication.

In continuous motion, iglide H370 operates within a temperature range of –40 to +392 degrees Fahrenheit, which enables it to outperform standard plastic bearings. With a moisture absorption rating of 0.0%, iglide H370 remains impervious to factors such as humidity or constant submersion in water. Iglide H370 is ideal for underwater applications, bottle-filling equipment, marine applications, dishwashers and applications requiring frequent wash downs.

Iglide bearings are a convenient, cost-effective alternative to bronze, metal-backed and custom injection-molded bearings. Igus has developed more than 20 high-performance, engineered polymers each with its own unique set of properties, and with more than 6,000 bearing sizes and styles in stock, igus can provide a bearing for any occasion. Iglide bearings can be used in diverse environments such as high-loads, chemicals, dirt and dust.

www.igus.com

Linear Motion Tips

iglide Q plastic bearings deliver a superior performance

Miles Budimir — Thu, 26 Feb 2009 17:21:17 +0000

EAST PROVIDENCE, R.I. – Igus® Inc. offers iglide Q specifically designed for high-load applications. Iglide Q is an economical, maintenance-free alternative to bronze, metal-backed and custom injection-molded bearings. Even at maximum loads of 14,500 pounds per square inch (PSI), iglide Q boasts the lowest coefficient of friction of any iglide plain bearing, enabling it to deliver a superior performance with limited wear.

Iglide Q is well-suited for oscillating applications and can be used where both shock and impact loads are present. Iglide Q also is impervious to a wide range of chemical offenders, including organic solvents, fuels, oils and fats and, like igus’ entire family of iglide bearings, is lubrication-free, corrosion-free and dirt-resistant.

In continuous motion, iglide Q operates within a permissible temperature range of –40 to +275 degrees Fahrenheit and can withstand short-term exposure up to 311 degrees Fahrenheit. Iglide Q can be paired with an array of different shaft materials such as stainless steel or hard-anodized aluminum. Iglide Q’s high-load capacity makes it a viable choice for material-handling machinery, scissor lifts, motorcycle stands, lift tables, amusement park rides and many more.

Iglide Q is available in a variety of both metric and inch sizes.

www.igus.com

Linear Motion Tips

iglide T500 bearings resist harsh chemicals and caustic substances

Miles Budimir — Thu, 26 Feb 2009 05:51:17 +0000

EAST PROVIDENCE, R.I. – Iglide® T500 plain bearings from igus® Inc., a world-leading developer of plastic bearing technology, are designed to resist harsh chemicals and caustic substances. Iglide T500 is a member of the iglide plastic bearing family from igus, a line of all-polymer bearings requiring no external lubrication or maintenance.

Iglide T500 attains exceptional heat conductivity due to a unique material blend and thin-walled construction. This enables the bearing to achieve higher speeds than otherwise would be possible. Iglide T500 is an ideal choice for both oscillating, high-loads and high-frequency, low-load applications. In applications with low speeds and radial pressures higher than 8,700 psi iglide T500 lasts twice as long as coated or lubricated metal bearings.

Iglide T500 withstands temperatures of 485 degrees Fahrenheit in continuous operation and up to 600 degrees Fahrenheit for short intervals. It can reach PV values up to approximately 100,000 during dry operation with an almost identical static and dynamic coefficient of friction for effective start-up performance. Iglide T500 is dry running and resistant to UV rays, corrosion and chemicals.

Ideal applications for iglide T500 include outdoor and marine equipment, power transmission, semi-conductor, textile and high heat equipment such as ovens.

Linear Motion Tips

Plastic bearings prove a versatile, cost-effective solution for engineers

Miles Budimir — Thu, 26 Feb 2009 05:44:17 +0000

EAST PROVIDENCE, R.I. – Igus® Inc., offers iglide J, a cost-effective, maintenance-free alternative to bronze, metal-backed and custom injection-molded bearings. Iglide J is available in sleeve, flange and thrust-washer configurations and also can be custom molded to meet the specific needs of any customer.

Iglide J is ideal for both high-speed and low-speed applications, as it operates flawlessly at rates up to 1,968 feet per minute (fpm) in linear motion and 197 fpm in rotary motion. Even when used on a wide range of different shaft materials such as hard anodized aluminum or cold rolled steel, iglide J incurs little to no wear, which makes it a versatile solution for engineers. Iglide J also possesses an extremely low coefficient of friction in applications that do not exceed 5,075 pounds per square inch (psi).

In addition to these benefits, iglide J is also:

lubrication-free;

corrosion-resistant;

UV-resistant; and

impervious to chemicals such as alcohol, weak acids and fuels.

Due to its many merits, igus uses iglide J throughout its product lines. The material is used in its DryLin R linear bearings, which are well-suited for debris-ridden or wet environments and its linear slide elements used on every DryLin linear guide system.

Igus’ entire iglide family includes more than 7,000 inch and metric bearing sizes and styles available from stock.

www.igus.com

Linear Motion Tips

Plastic bearings are an economical, maintenance-free alternative to bronze bearings

Miles Budimir — Thu, 26 Feb 2009 05:12:14 +0000

EAST PROVIDENCE, R.I. – Igus® Inc. offers iglide R, an economical, maintenance-free alternative to bronze bearings. Iglide R incurs little to no low wear even at high speeds and also is oil-free and resistant to dirt, dust and UV rays. These qualities make iglide R an ideal choice for agricultural and outdoor applications, specifically commercial mowers and golf course equipment, which benefit from its contamination-free properties.

Like all iglide bearings, iglide R is comprised of high-performance plastics that are lightweight and lubrication-free. Unlike bronze bushings, which require regular maintenance and lubrication, engineers can install iglide R and forget it. It will not only outlive its bronze counterparts, but also will reduce costs and never corrode.

Iglide R operates within a permissible temperature range of –58 degrees Fahrenheit to +230 degrees Fahrenheit. It can be used in linear, oscillating and rotating applications and is available in both sleeve and flange styles with inner diameters ranging from 3/16 of an inch to 2 inches. Iglide R can be used in a wide range of environments, including those where water or chemicals are present, due to its low moisture absorption and resistance to alcohol, greases, oils and fuels.

When choosing any iglide plastic bearing from igus, users will enjoy:

no maintenance;

dry-running performance;

predictable wear rates and life expectancies;

lower costs; and

an extensive choice of more than 8,000 bearing styles and sizes from stock.

Contact a design technician today for free samples of iglide R bearings.

www.igus.com

Linear Motion Tips