The new AT20-600 series of Motorized Vertical Lift Stages from Optimal Engineering Systems, Inc. (OES) features a vertical lift of 600 mm. The AT20-600-01 is driven by a two-phase stepper motor and features a repeatability of 5 microns, positional accuracy of 20 microns and has a knob on the motor for manual adjustment. The AT20-600-02 […]
Linear actuator features integrated controller
With the PSA56, Nanotec launches its first linear actuator with integrated controller. This extremely compact drive unit combines the LSA56 hybrid linear actuator and the intelligent controllers of Nanotec’s PD4-E series. The integrated magnetic single-turn absolute encoder has a resolution of 1,024 CPR and supports field-oriented control via CANopen. The screw’s protective coating is made […]
New linear position detector series from Nidec
Nidec Machine Tool Corporation will launch the MPLS series, an inductive coupling principle-type linear position detector that determines a machine’s position and detects its feed digitally, on November 1st. Intended for compact machine tools, it uses a signal-detection method and integrates numbers of substrates to realize a simple structure that does not require scale wiring […]
Linear electric motors designed specifically for machine tools
NUM has launched a series of brushless linear servo motors designed specifically for continuous duty cycle applications in machine tools. NUM’s new LMX series linear motors incorporate a number of features to help mitigate the effect of arduous operating conditions. Their moving coil primary section is fully encapsulated in a robust stainless-steel housing, with an […]
Precision ball splines deliver robust rotary and linear motion integration
Thomson Industries, Inc., has introduced a line of precision ball splines that enable robust delivery of rotary and linear motion on a single shaft. These new components give designers more flexibility to compress an assembly, extend a stroke, distribute a load or otherwise meet modern automation demands. “Ball splines have provided an elegant, single shaft […]
Low-load polymer bushing bearings increase motion system design flexibility
Thomson Industries, Inc., has added a polymer bushing to its line of state-of-the-art Ball Bushing bearings. It expands the company’s extensive bearing portfolio, providing design engineers a new option that helps them avoid overdesigning for low-load applications. Thomson polymer bushing bearings provide a reliable solution for machines where moment load is non-critical (30 to 40 […]
Rugged linear position sensors with optimized accuracy
LINARIX linear positions sensors from POSITAL have been updated with extra-heavy-duty draw-wire mechanisms and with a convenient pre-scaling option for devices with analog communication interfaces. LINARIX position sensors are suitable for a wide variety of applications, including medical equipment, packaging and materials handling systems, forklifts, overhead gantries, lifts, and flow control gates in water management […]
New high-precision, three-axis gimbal mounts with four motor options
OES (Optimal Engineering Systems, Inc.) has released four all new three-axis Azimuth, Angular Elevation, and Roll Gimbal Mounts. These new high-precision and high stability AU270-AER Gimbal Mounts locate the surface of the roll stage 115 mm below the center line of rotation allowing for the positioning of cameras, optics, lasers and instrumentation for scanning, tracking, […]
Touchless linear position sensors for tight spaces
The new TFD Series of touchless linear position sensors from Novotechnik, U.S. provide wear-free operation in tight spaces, with maximum sensor dimensions of 40 x 27 x 7 mm thin. Sensing direction can be either parallel or perpendicular to mounting holes. The TFD-4000 Series uses a magnetic position marker to provide a touchless measurement range […]
A better control method for laser materials processing: Part 2 of 2
(This is the second article in a two-part series, the first of which can be found here.) Dr. Cliff Jolliffe Head of Automation Market Segment Physik Instrumente (PI) GmbH Modular controllers offer an easy and straightforward way to link a laser to multi-axis positioning systems. For instance, PI’s ACS Laser Control Module (LCM) introduces a […]