The AT10-120 motorized vertical stage from Optimal Engineering Systems, Inc. (OES) is a high resolution, low profile, high load vertical lift stage that can be easily integrated into almost any application. The large 220 x 140 mm (8.7 x 5.5 in.) drilled and tapped platform has a vertical travel of 110 mm (4.3 in.). The […]
stages
IntelLiDrives unveils AccuRing direct-drive rotary stages
IntelLiDrives (www.intellidrives.com) has introduced the all-new AccuRing series direct-drive rotary stages that offer superior velocity control and angular positioning with large apertures. Its large aperture rotary stages deliver zero backlash as well as no gear vibration or gear wear. The new direct drive AccuRings are much faster than gear and worm drives. The stage’s repeatability […]
H2W linear stepper motor stages ideal for robotic applications
H2W (www.h2wtech.com) has launched a high performance linear stepper motor stages that travel at a maximum speed of 80 in/sec (two m/sec). These four and two phase linear steppers also deliver a maximum acceleration of 1G and stoke lengths of 144 in. (3.6 m), making them ideal for wire bonding, pick-and-place, parts transfer, inspection machines, […]
Nanopositioning Rotary Stages from Aerotech
Aerotech’s ANT95-R and ANT130-R direct-drive rotary stages are part of Aerotech’s nano Motion Technology product line. They offer unprecedented in-position stability (0.005 arc sec) and incremental motion (0.01 arc sec) using Aerotech’s unique direct-drive technology, and are suitable for demanding high-throughput manufacturing applications such as disk-drive and MEMS manufacture and test, fiber-optic device alignment, as […]
Hard-Cover, Side-Sealed Linear Stages from Aerotech
Pittsburgh, Pa. – Aerotech’s PRO Series are low cost, side seal, hard cover, ball-screw-driven linear stages available in 68 standard models with travels from 50 to 1500mm. The PRO Series features a hard-cover design for protection from debris, while side-seals keep dirt and particulates out of the stage and protect the bearing surfaces from contamination. […]
Nanopositioning Stage for Super-Resolution Microscopy
Auburn, Mass. – The nano1x3 ™ series X-Y and X-Y-Z nanopositioning stages from PI (Physik Instrumente) are multi-axis stages for super-resolution microscopy applications, providing highly accurate motion with closed-loop control for sub-nanometer precision over travel ranges of 200µm in X-Y and X-Y-Z planes. The stages feature a piezo controller and comes with three, 24-bit digital […]
Multi-axis Modular Assembly from Steinmeyer
BURLINGTON, MA — Steinmeyer, Inc. announced a new multi-axis modular assembly designed specifically for 3D target positioning and alignment. Typical applications include R&D and scientific uses such as synchrotrons. For example, the new system is ideal for beam positioning and sample manipulation. The assembly utilizes the compact Steinmeyer type MT130 linear stage together with a […]
Aerotech ANT130-L Series Stages
Aerotech ANT130-L series stages offer best-in-class performance in speed, accuracy, resolution, repeatability, reliability, and travel range, and are offered in two accuracy grades. With its low profile and outstanding performance, the ANT130-L is the ultimate solution for high-accuracy alignment, inspection, positioning, and measurement stations. The ANT130-L employs a center-driven, non-cogging, noncontact linear motor and encoder […]
CLS Sealing System for NUTEC Stages
Deer Park, NY — The new CLS sealing system for NUTEC stages offers superior protection in applications with contaminated environments, an advancement that translates into a motion platform with greater long-term reliability, greater efficiencies and lower cost of ownership. The CLS sealing system patented design includes a cleverly concealed linear seal under the 3-sided stainless […]