• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
  • Skip to footer

Linear Motion Tips

Covering Linear Motion Systems, Components and Linear Motion Resources

  • New
    • Editor’s blog
    • Industry news
    • Motion Casebook
    • Video
  • Applications
  • Slides + guides
    • Ball + roller guides
    • Track roller (cam + wheel) guides
    • Crossed-roller slides
    • Linear bearings
    • Plastic + composite guides
  • Drives
    • Ball + lead + roller screws
    • Belt + chain drives for linear
    • Rack + pinion sets
  • Actuators
    • Ball + leadscrew driven
    • Belt + chain driven
    • Linear motors
    • Mini + piezo + voice coil
    • Rack + pinion driven
    • Rigid-chain actuators
  • Encoders + sensors (linear) + I/O
  • Stages + gantries
  • Suppliers

The top 10 linear motion articles of 2020

December 28, 2020 By Danielle Collins Leave a Comment

← PREVIOUS PAGE

#6: How to calculate beam deflection

Beam Deflection

There are many situations in motion applications where a linear guide or actuator isn’t fully supported along its entire length. In these cases, deflection (due to the component’s own weight and due to applied loads and forces) can affect the running properties of the bearings and cause poor operation, in the form of premature wear and binding. Fortunately, most linear guides and actuators can be modeled as beams, and their deflection can be calculated using common beam deflection equations.

NEXT PAGE →

You may also like:

  • stepper motor resonance
    What is stepper motor resonance and how can it be…
  • roll pitch yaw
    Motion basics: How to define roll, pitch, and yaw for…
  • electromagnetism
    Electromagnetism basics for mechanical engineers

  • How to use a torque-speed curve to select a servo…

  • When should you use microstepping control for stepper motors?
Pages: Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10

Filed Under: Applications, Ball + lead + roller screws, Ball + leadscrew driven, Ball + roller guides, Belt + chain driven, Featured, Rack + pinion driven, Rack + pinion sets

Reader Interactions

Leave a Reply

You must be logged in to post a comment.

Primary Sidebar

DESIGN GUIDE LIBRARY

“motion
Subscribe Today

RSS Featured White Papers

  • Evaluating actuators for washdown in food & beverage applications
  • Identifying Best-Value Linear Motion Technologies
  • Introduction to accuracy and repeatability in linear motion systems

RSS Motion Control Tips

  • Encoders from SIKO support Industrial Ethernet
  • Draw-wire encoders from SIKO measure position, speed and inclination
  • Incremental encoders configurable via NFC (near-field communication)
  • Low-cost motion control offered with CLICK PLUS PLCs from AutomationDirect
  • Compact 4-axis controller for highly dynamic applications

Footer

Linear Motion Tips

Design World Network

Design World Online
The Robot Report
Coupling Tips
Motion Control Tips
Bearing Tips
Fastener Engineering

Linear Motion Tips

Subscribe to our newsletter
Advertise with us
Contact us
About us

Follow us on TwitterAdd us on FacebookAdd us on LinkedInAdd us on YouTubeAdd us on Instagram

Copyright © 2022 · WTWH Media LLC and its licensors. All rights reserved.
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of WTWH Media.

Privacy Policy