• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
  • Skip to footer

Linear Motion Tips

Covering Linear Motion Systems, Components and Linear Motion Resources

  • New
    • Editor’s blog
    • Industry news
    • Motion Casebook
    • Video
  • Applications
  • Slides + guides
    • Ball + roller guides
    • Track roller (cam + wheel) guides
    • Crossed-roller slides
    • Linear bearings
    • Plastic + composite guides
  • Drives
    • Ball + lead + roller screws
    • Belt + chain drives for linear
    • Rack + pinion sets
  • Actuators
    • Ball + leadscrew driven
    • Belt + chain driven
    • Linear motors
    • Mini + piezo + voice coil
    • Rack + pinion driven
    • Rigid-chain actuators
  • Encoders + sensors (linear) + I/O
  • Stages + gantries
  • Suppliers

Integrated Linear Systems

MKS now offers Newport MLT-Z vertical linear stages and pre-assembled MLT-XYZ stacks

December 15, 2021 By Lisa Eitel Leave a Comment

MKS Instruments is extending its MLT Series of compact, low profile high precision linear stages with pre-assembled XYZ-stacks and MLT-Z vertical stages. MLT stages are ideal for typical scanning or point-to-point applications in semiconductor, industrial, or research markets for metrology, sensor test and calibration, alignment, and pick-and-place assembly. The MLT series showcases the latest innovations and […]

Filed Under: Integrated Linear Systems, Stages + gantries Tagged With: newport

What factors contribute to friction in linear motion systems?

October 13, 2021 By Danielle Collins Leave a Comment

bearing friction

Designers and engineers typically try to avoid or mitigate friction in linear motion systems. Although friction isn’t always bad — in some applications, it can provide a damping effect and help improve servo tuning — when it comes to linear motion systems, it increases the amount of force required to move a load, creates heat, […]

Filed Under: Applications, FAQs + basics, Featured, Linear actuators (all), Stages + gantries

Single-axis linear stepper stages with integrated encoder and electronics package

September 15, 2021 By Danielle Collins Leave a Comment

linear stepper

H2W now offers a revolutionary series of single-axis linear stepper stages that integrates a linear encoder into the stage to operate the linear stepper motor as a 2-phase brushless motor when coupled with an advanced motion control electronics package provided by H2W. When operated this way, the motors will tend to run cooler, as they […]

Filed Under: Industry news, Linear motors, Stages + gantries Tagged With: H2W Technologies, h2wtechnologies

What makes a linear stage different from other types of linear motion systems?

September 8, 2021 By Danielle Collins Leave a Comment

linear stage

Linear motion systems — consisting of a base or housing, a guide system, and a driving mechanism — are available in a wide variety of designs and configurations to suit almost any application. And because their designs are so varied, they’re often categorized according to key construction and operating principles. Case in point: The term […]

Filed Under: FAQs + basics, Featured, Stages + gantries

Four-axis linear motor driven stage features high speed, micron resolution

August 17, 2021 By Miles Budimir Leave a Comment

linear motion stage

The Four-Axis Gantry (YY’ZZ’) from H2W Technologies is a four-axis positioning stage that consists of two SRS-007-03-006-01 brushless linear motor stages; each vertically mounted to two independently moving horizontal linear axis. It’s ideal for applications that require multiple independent motions on a single travel plane. When an application requires fast motion with a stroke over […]

Filed Under: Integrated Linear Systems, Stages + gantries

How does a vacuum preloaded air bearing work?

July 26, 2021 By Danielle Collins Leave a Comment

vacuum preloaded air bearing

Air bearings provide several advantages over rolling element bearings, including higher travel accuracy and reduced friction and heat generation. But because air is compressible, air bearings can be less stiff and exhibit more deflection under load than similar rolling element bearings (although the stiffness characteristics of air bearings are very linear). However, the compressible nature of air […]

Filed Under: FAQs + basics, Featured, Stages + gantries

Dover Motion launches SmartStage XY linear positioner

July 21, 2021 By Kelsey Zebrowski Leave a Comment

Dover Motion, with over 30 years of precision motion design and manufacturing expertise, announces the launch of their newest product: the SmartStage XY. The SmartStage XY platform simplifies the motion and control into one package so instrument design teams can focus on bringing their core technology to market. The SmartStage XY combines the precise direct-drive […]

Filed Under: Stages + gantries Tagged With: dovermotion

New pallet conveyor system boasts quick and easy adaptability

July 13, 2021 By Miles Budimir Leave a Comment

pallet conveyor system

mk North America’s new pallet conveyor system, the VersaFlex P08, is designed to quickly be altered and adapt to product changes. It can also convey products that have unusual shape or geometry with ease. VersaFlex P08 carries loads up to 22 lb per pallet and can carry multiple pallets at once. It also boasts repeat […]

Filed Under: Integrated Linear Systems Tagged With: Conveyors

New white paper for OEMs spotlights linear motion in biomedical, life sciences applications

June 22, 2021 By Miles Budimir Leave a Comment

linear motion

SCHNEEBERGER Inc. announces a new white paper titled “Advancing Life Science and Biomedical Manufacturing Through Linear Motion: The OEM’s Guide.” It explores how original equipment manufacturers (OEMs) can achieve advancements in life science and biomedical manufacturing through the use of next-generation linear motion technology. Facing ongoing competitive pressures and market growth demands, life science and […]

Filed Under: Industry news, Integrated Linear Systems, Linear actuators (all) Tagged With: linear motion, Schneeberger

New Smart Function Kit for Handling from Bosch Rexroth reduces engineering outlay, simplifies commissioning

May 26, 2021 By Miles Budimir Leave a Comment

mechatronics

Following the introduction of the Smart Function Kit for Pressing and Joining, Bosch Rexroth is expanding its Smart MechatroniX solution platform with a second plug-and-produce subsystem that can be operated intuitively. The new Smart Function Kit for Handling can be used in a variety of areas, such as production handling, machine assembly and packaging. Pick-and-place […]

Filed Under: Featured, Integrated Linear Systems Tagged With: Bosch Rexroth

  • « Go to Previous Page
  • Go to page 1
  • Go to page 2
  • Go to page 3
  • Go to page 4
  • Interim pages omitted …
  • Go to page 30
  • Go to Next Page »

Primary Sidebar

DESIGN GUIDE LIBRARY

“motion
Subscribe Today

RSS Featured White Papers

  • Evaluating actuators for washdown in food & beverage applications
  • Identifying Best-Value Linear Motion Technologies
  • Introduction to accuracy and repeatability in linear motion systems

RSS Motion Control Tips

  • New gearboxes for electric motors in mobile machines
  • Leading motion-control and actuation options for robotics
  • Basics of wave and cycloidal gearing for robotics and servo designs
  • New micro servo-drive system for extra-low-voltage manufacturing applications
  • Incremental encoders offer 16 quadrature resolutions from 96 to 4,096 PPR

Footer

Linear Motion Tips

Design World Network

Design World Online
The Robot Report
Coupling Tips
Motion Control Tips
Bearing Tips
Fastener Engineering

Linear Motion Tips

Subscribe to our newsletter
Advertise with us
Contact us
About us

Follow us on TwitterAdd us on FacebookAdd us on LinkedInAdd us on YouTubeAdd us on Instagram

Copyright © 2022 · WTWH Media LLC and its licensors. All rights reserved.
The material on this site may not be reproduced, distributed, transmitted, cached or otherwise used, except with the prior written permission of WTWH Media.

Privacy Policy